Thermal conductivity

The thermal finishing configuration selector allows you to quickly obtain a selection of thermal finishing solutions suitable for your project. However, do not hesitate to contact us using our contact form to obtain the advice of our experts.


MAPSIL® 214 BV

Technical sheet
Introduction Low outgassing, Silicone-2K, thermally conductive adhesive. MAPSIL 214 BV is an adhesive elastomer, designed to participate in the passive thermal regulation of satellites during their missions. This coating meets various environmental and strategic regulations, but also the quality requirements of EN9100 and space companies. It has a significant number of characterisations, publications and flight references. This coating is “Ground & Flight" rated on many substrates, notably through the fine tuning of special procedures we develop.
Usages MAPSIL 214 BV is silicone resin, notably used for coating,- BV: Low viscosity (» 10,000 mPa.s)
Advantages -ITAR / EAR Free Products -REACH Compliant Products
Associated services - Coating application service possible (MAP SPACE COATINGS premises or Customer’s premises / please contact us) - Thermo-optical, mechanical, thermal, rheological, outgassing, electrical, thermo-mechanical Expertise / Characterisation - Training in the implementation of coatings - Application audit
Quality - ISO 9001 - EN 9100 - ASF CNES - Systematic checking of all batches - Characterisations carried out as defined on the statement of conformity
Solar absorptivity NA
Infrared emissivity NA
Electrical resistance >10^14 Ohm/cm
Thermal conductivity 0.31 W/m.K
Ultimate tensile strength
Elongation at rupture
Shore A hardness
RML 0,23%
CVCM 0,04%
Substrates GLASS - COMPOSITES - METAL ALLOYS
Primer PSX
Qualification report reference QUALIFICATION REPORT 89-CT-DRT-TVE-TH_074
Satellite reference .
TIS .
Product family Adhesives
Ageing properties Tested in: - Satellite internal environment - Ground storage

MAPLUB® SH 100-c

Introduction Low-outgassing grease lubricant for satellite applications. MAPLUB® SH 100-c grease has been specially formulated to meet the constraints imposed on long-life satellite mechanisms. Thus: Its chemical stability with respect to metallic and plastic materials allows its use for very long lifespans. To date, no degradation has been detected. It is ideal for the lubrication of parts made from fragile materials. Its low consistency leads to relatively low torques, especially at low temperatures. Its low vaporisation tendency makes it suitable for various applications operating in particular environments: vacuum equipment (vacuum pumps, etc.), electronics (manufacture of components) and electrical engineering (connections), scientific instrumentation (particle rings, etc.), automotive, aeronautics, nuclear, clean room robots.
Usages MAPLUB® SH 100-c is a grease-type lubricant developed for long-life applications under ultra-high vacuum, especially in the space environment, on supports such as: bearings, spherical bearings, gears, Harmonic Drive or Cyclo reduction gears, roller and ball screws, sliders.
Advantages -ITAR / EAR Free Products -REACH Compliant Products
Associated services - Thermal, rheological, outgassing expertise / characterisation
Quality - ISO 9001 - EN 9100 - 100% checking of batches - Characterisations carried out as defined on the statement of conformity
Solar absorptivity NA
Infrared emissivity NA
Electrical resistance NA
Thermal conductivity NA
Ultimate tensile strength NA
Elongation at rupture NA
Shore A hardness NA
RML NA
CVCM NA
Substrates METAL - CERAMIC - PLASTIC
Primer NA
Qualification report reference
Satellite reference .
TIS .
Product family Lubricants
Ageing properties

MAP AERO STATIC B

Technical sheet
Introduction Thermal and anti-static polyurethane finish coating for launcher. MAP AERO STATIC B is used to withstand the launch pad environment and stresses during launch. These two environments can degrade the launcher’s efficacy and reliability. MAP AERO STATIC B thus reduces the risk of corrosion, overheating and static electric discharge due to air friction, on launch. This coating meets various environmental and strategic regulations, but also the quality requirements of EN9100 and space companies. It has a significant number of characterisations, publications and flight references. This coating is “Ground & Flight" rated on many substrates.
Usages MAP AERO STATIC B coating can be applied to certain parts of the launcher, in composite and metallic alloys such as: Cryogenic main stage Acceleration stages with powder or boosters
Advantages -ITAR / EAR Free Products -REACH Compliant Products -Repair kit -Stripping kit
Associated services - Thermo-optical, mechanical, thermal, rheological, outgassing, electrical, thermo-mechanical Expertise / Characterisation - Training in the implementation of coatings - Application audit
Quality - ISO 9001 - EN 9100 - 100% checking of batches - Characterisations carried out as defined on the statement of conformity
Solar absorptivity 0,42
Infrared emissivity 0,85
Electrical resistance 1-100x10^6 Ohm/²
Thermal conductivity NA
Ultimate tensile strength NA
Elongation at rupture NA
Shore A hardness NA
RML NA
CVCM NA
Substrates Cork, foam, composite, metal, glass substrates: CFRP - NORCOAT HPK - Cryosof 2 - H920A - Cork P50 - Aluminium 7075T0 - Glass
Primer MAP AERO P - WP - MAP AERO WP + MAP AERO P
Qualification report reference Qualification report 85-CST-DRT-SST-TH-190
Satellite reference Ariane V, VEGA launchers
TIS .
Product family Launcher Coatings
Ageing properties Tested in: - Ground storage (cold, heat, salt spray, rain, thermal shock) - Partial vacuum