Thermal conductivity
The thermal finishing configuration selector allows you to quickly obtain a selection of thermal finishing solutions suitable for your project. However, do not hesitate to contact us using our contact form to obtain the advice of our experts.
MAP® PN
![]() |
Technical sheet | |
Introduction | Low-outgassing, black silicone thermal control coating, for satellites PN is a thermal finishing coating for satellites, designed to participate in the passive thermal regulation of satellites during their missions. This coating is specifically adapted to withstand the aggressions of the space environment and thus guarantee its function over a long service life. This coating meets various environmental and strategic regulations, but also the quality requirements of EN9100 and space companies. It has a significant number of characterisations, publications and flight references. This coating is Ground & Flight" rated on many substrates, notably through the fine tuning of special procedures we develop. | |
Usages | The PN thermal finish is especially used to ensure passive thermal regulation on satellite parts. | |
Advantages | -ITAR / EAR Free Products -REACH Compliant Products -Repair kit -Stripping kit | |
Associated services | - Coating application service possible (MAP SPACE COATINGS premises or Customers premises / please contact us) - Thermo-optical, mechanical, thermal, rheological, outgassing, electrical, thermo-mechanical Expertise / Characterisation - Training in the implementation of coatings - Application audit | |
Quality | - ISO 9001 - EN 9100 - ASF CNES - Systematic checking of all batches - Characterisations carried out as defined on the statement of conformity | |
Solar absorptivity | 0,95 | |
Infrared emissivity | 0,9 | |
Electrical resistance | >2x10^9 Ohm/² | |
Thermal conductivity | NA | |
Ultimate tensile strength | NA | |
Elongation at rupture | NA | |
Shore A hardness | NA | |
RML | 0,30% | |
CVCM | 0,00% | |
Substrates | ALU AU4G - ALODINE ALU -ELECTROCHEMICAL NICKEL - SmCO MAGNET - TI | |
Primer | PSX - E' - PH11 + PSX | |
Qualification report reference | Qualification report_DCT-TV-TH-2004-697NT04-697 Measuring the diffusion on black MAP PN_DCT-SI-OP-2005-088 | |
Satellite reference | . | |
TIS | . | |
Product family | Thermal Control coatings for Satellites | |
Ageing properties | Tested in: - LEO Env - Ground storage - ATOX - ESD |
MAPSIL® QS 1123
![]() |
Technical sheet | |
Introduction | Low-outgassing, transparent Silicone-2K coating MAPSIL QS1123 is an electrically insulating silicone coating designed to protect electronic satellite boards. This coating is specifically adapted to withstand the aggressions of the space environment and thus guarantee its function over a long service life. This coating meets various environmental and strategic regulations, but also the quality requirements of EN9100 and space companies. It has a significant number of characterisations, publications and flight references. | |
Usages | MAPSIL® QS 1123 is a silicone elastomer for encapsulating electronic components, bonding optical parts, PCB varnishing, electrical insulation, atomic oxygen protection, etc. | |
Advantages | -ITAR / EAR Free Products -REACH Compliant Products | |
Associated services | - Coating application service possible (MAP SPACE COATINGS premises or Customers premises / please contact us) - Thermo-optical, mechanical, thermal, rheological, outgassing, electrical, thermo-mechanical Expertise / Characterisation - Training in the implementation of coatings - Application audit | |
Quality | - ISO 9001 - EN 9100 - 100% checking of batches - Characterisations carried out as defined on the statement of conformity | |
Solar absorptivity | NA | |
Infrared emissivity | NA | |
Electrical resistance | 1.4x10^11 Ohm/² | |
Thermal conductivity | 0.16 W.m^-1.K^-1 @ 23°C 0.22 W.m^-1.K^-1 @ 23°C | |
Ultimate tensile strength | 9 MPa | |
Elongation at rupture | 150% | |
Shore A hardness | 50 | |
RML | 0,07% | |
CVCM | 0,01% | |
Substrates | GLASS - COMPOSITES - METAL ALLOYS - ORGANIC FILMS - MINERAL SUBSTRATES | |
Primer | ALU D - PSX | |
Qualification report reference | ESD TEST RESULTS OF SILICONE ADHESIVES ON OSR ASSEMBLIES DCT/TV/TH/NT11-8705 EIGHT YEARS GEO GROUND TESTING OF THERMAL CONTROL COATINGS_DCT/TV/TH/NT10-1267 QUALIFICATION REPORT MAPSIL QS1123 SILICONE RESIN_ DCT/TV/TH/09-14628 THERMAL CONDUCTIVITY MEASUREMENT OF MAPSIL QS1123 _ DCT/TV/TH/NT09-6039 | |
Satellite reference | . | |
TIS | . | |
Product family | Silicone Conformal Coatings | |
Ageing properties | Tested in: - Geo Env - LEO Env - Ground storage - ATOX - ESD |
MAPSIL® QS 1123 TA77
![]() |
Technical sheet | |
Introduction | Low outgassing, Silicone-2K, thermally conductive adhesive. MAPSIL QS 1123 TA77 is an adhesive elastomer, designed to participate in the passive thermal regulation of satellites during their missions. This coating meets various environmental and strategic regulations, but also the quality requirements of EN9100 and space companies. It has a significant number of characterisations, publications and flight references. This coating is Ground & Flight" rated on many substrates, notably through the fine tuning of special procedures we develop. | |
Usages | MAPSIL QS1123 TA77 is silicone resin, especially used for coating, bonding and joint construction. | |
Advantages | -ITAR / EAR Free Products -REACH Compliant Products - Double body syringe | |
Associated services | - Coating application service possible (MAP SPACE COATINGS premises or Customers premises / please contact us) - Thermo-optical, mechanical, thermal, rheological, outgassing, electrical, thermo-mechanical Expertise / Characterisation - Training in the implementation of coatings - Application audit | |
Quality | - ISO 9001 - EN 9100 - ASF CNES - Systematic checking of all batches - Characterisations carried out as defined on the statement of conformity | |
Solar absorptivity | NA | |
Infrared emissivity | NA | |
Electrical resistance | 5.10^12 Ohm/² | |
Thermal conductivity | 0.77 W.m^-1.K^-1 | |
Ultimate tensile strength | 4.4 MPa | |
Elongation at rupture | 80% | |
Shore A hardness | 74 | |
RML | 0,39% | |
CVCM | 0,02% | |
Substrates | GLASS - COMPOSITES - METAL ALLOYS | |
Primer | ALU D - PSX | |
Qualification report reference | MAPSIL®QS1123 TA77 DCT/TV/TH/NT 2016-0009068 EIGHT YEARS GEO GROUND TESTING OF THERMAL CONTROL COATINGS_DCT/TV/TH/NT10-1267 QUALIFICATION REPORT MAPSIL-QS1123-DCT-TV-THNT09-14628 QUALIFICATION REPORT EIGHT YEARS GEO GROUND SIMULATION N/S FACES ON ANTISTATIC PIGMENT RF2/14062 DESP | |
Satellite reference | . | |
TIS | . | |
Product family | Adhesives | |
Ageing properties | Tested in: - Satellite internal environment - Ground storage |
MAPLUB® PF 100-c
Introduction | MAPLUB® PF 100-c grease has been specially formulated to meet the constraints imposed on long-life satellite mechanisms. Thus: Its low consistency leads to relatively low torques, especially at low temperatures. It is ideal for the lubrication of parts made from fragile materials. The reactivity of its base oil with metal materials when mechanically stressed can lead to polymerisation of the product and increase friction. It is therefore advisable to carry out service life tests representative of the intended application. However, the use of non-metallic coatings on parts can significantly reduce this phenomenon. Its low vaporisation tendency makes it suitable for various applications operating in particular environments: vacuum equipment (vacuum pumps, etc.), electronics (manufacture of components) and electrical engineering (connections), scientific instrumentation (particle rings, etc.), automotive, aeronautics, nuclear, clean room robots. |
Usages | MAPLUB® PF 100-c is a grease-type lubricant developed for long-life applications under ultra-high vacuum, especially in the space environment, on supports such as: bearings, bearing housings, spherical bearings, gears, Harmonic Drive or Cyclo gears, roller screws, ball screws, slides. |
Advantages | -ITAR / EAR Free Products -REACH Compliant Products |
Associated services | - Thermal, rheological, outgassing expertise / characterisation |
Quality | - ISO 9001 - EN 9100 - 100% checking of batches - Characterisations carried out as defined on the statement of conformity |
Solar absorptivity | NA |
Infrared emissivity | NA |
Electrical resistance | NA |
Thermal conductivity | NA |
Ultimate tensile strength | NA |
Elongation at rupture | NA |
Shore A hardness | NA |
RML | NA |
CVCM | NA |
Substrates | METAL - CERAMIC - PLASTIC |
Primer | NA |
Qualification report reference | |
Satellite reference | . |
TIS | . |
Product family | Lubricants |
Ageing properties |
MAP® SCK5N
![]() |
Technical sheet | |
Introduction | Anti-static, low-outgassing white silicone thermal control coating for satellites MAP® SCK5N is a thermal finishing coating for satellites, designed to participate in the passive thermal regulation of satellites during their missions. This coating is specifically adapted to withstand the aggressions of the space environment and thus guarantee its function over a long service life. This coating meets various environmental and strategic regulations, but also the quality requirements of EN9100 and space companies. It has a significant number of characterisations, publications and flight references. This coating is Ground & Flight" rated on many substrates, notably through the fine tuning of special procedures we develop. | |
Usages | MAP® SCK5N thermal finish is especially used to ensure passive thermal regulation on: Connecting sleeves Antennas Kapton sheets Radomes | |
Advantages | -ITAR / EAR Free Products -REACH Compliant Products -Stripping kit | |
Associated services | - Coating application service possible (MAP SPACE COATINGS premises or Customers premises / please contact us) - Thermo-optical, mechanical, thermal, rheological, outgassing, electrical, thermo-mechanical Expertise / Characterisation - Training in the implementation of coatings - Application audit | |
Quality | - ISO 9001 - EN 9100 - ASF CNES - Systematic checking of all batches - Characterisations carried out as defined on the statement of conformity | |
Solar absorptivity | 0,3 | |
Infrared emissivity | 0,92 | |
Electrical resistance | <10^9 Ohm/² | |
Thermal conductivity | NA | |
Ultimate tensile strength | NA | |
Elongation at rupture | NA | |
Shore A hardness | NA | |
RML | 0,11% | |
CVCM | 0,01% | |
Substrates | Kapton® HN 25 µm - 2024-T3 - VESPEL SP 1 TA6V 6061-T6 Al Be-Cu G11 KEVLAR Kapton® HN Kapton® HPPST - KEVLAR/EPOXY - ULTEM | |
Primer | E' | |
Qualification report reference | MAP SCK5N DSO-TB-TH-2020-25529_Ed1_Rev1 | |
Satellite reference | ||
TIS | . | |
Product family | Thermal Control coatings for Satellites | |
Ageing properties | Tested in: - Geo Env - Ground storage - ESD |
MAP® PSBN
![]() |
Technical sheet | |
Introduction | Waterborne, low-outgassing white silicone thermal control coating for satellites PSBN is a thermal finishing coating for satellites, designed to participate in the passive thermal regulation of satellites during their missions. This coating is specifically adapted to withstand the aggressions of the space environment and thus guarantee its function over a long service life. This coating meets various environmental and strategic regulations, but also the quality requirements of EN9100 and space companies. It has a significant number of characterisations, publications and flight references. This coating is Ground & Flight" rated on many substrates, notably through the fine tuning of special procedures we develop. | |
Usages | PSBN thermal finish is especially used to ensure passive thermal regulation on: Radiator panels Tubes Horns | |
Advantages | -ITAR / EAR Free Products -REACH Compliant Products -Product qualified FAST CURING Process -Stripping kit | |
Associated services | - Coating application service possible (MAP SPACE COATINGS premises or Customers premises / please contact us) - Thermo-optical, mechanical, thermal, rheological, outgassing, electrical, thermo-mechanical Expertise / Characterisation - Training in the implementation of coatings - Application audit | |
Quality | - ISO 9001 - EN 9100 - ASF CNES - Systematic checking of all batches - Characterisations carried out as defined on the statement of conformity | |
Solar absorptivity | 0,15 | |
Infrared emissivity | 0,92 | |
Electrical resistance | <10^12 Ohm/² | |
Thermal conductivity | NA | |
Ultimate tensile strength | NA | |
Elongation at rupture | NA | |
Shore A hardness | NA | |
RML | 0,29% | |
CVCM | 0,00% | |
Substrates | ALU AU4G AL AL - TA6V | |
Primer | . | |
Qualification report reference | Fast Curing DCT-TV-TH-2014-10593 Qualification report DCT-TV-TH-NT06-25934 DTS_AE_MTE_TH_03-94_Ed1_Rev0_3 years GEO DCT-TV-TH-NT10-1267-8 years GEO | |
Satellite reference | MOSIF BEPI-COLOMBO | |
TIS | . | |
Product family | Thermal Control coatings for Satellites | |
Ageing properties | Tested in: - Geo Env - LEO Env - Ground storage - ATOX - ESD |